Appendix B - Apple Os 10 Installation - microHAM DIGI KEYER Manual

APPENDIX B – APPLE OS 10 INSTALLATION
1) To Install DIGI KEYER in Apple's OS 10 prepare the DIGI KEYER as for your radio as shown on
Page 4.
2) Copy the FTDI USB Driver disk image
(.dmg) to your desktop by clicking on
the "Install microHAM Port Driver for
Macintosh OS 10.0 – 10.39" or "Install
microHAM Port Driver for Macintosh
OS 10.4+" link from the supplied CD
or download the most recent driver
package from the microHAM web site:
www.microHAM.com/downloads.html
3) Open the disk image by clicking on it.
4) Run FTDIUSBSerialDriver.pkg by
clicking on it and follow the prompts.
5) Plug in the USB cable
6) Turn on the radio or external power supply.
microHAM © 2006 All rights reserved
30