Table of Contents
Advertisement
On this tab you can define nine messages of up to 50 characters each which are stored in DIGI KEYER's
non-volitile memory. Each memory may have a programmable repeat delay and/or call another memory.
Commands which may be included in a memory are:
Set PTT:
close PTT.
Clear PTT:
release PTT.
CR & LF:
Insert Carriage Return/Line Feed
Jump to:
used for looping a message or calling another message
Delay:
sets the delay in seconds before looping or calling another message
Store:
saves one message to DIGI KEYER memory
Store All:
saves all messages to DIGI KEYER memory
Load from File: loads all messages from file
Save to File:
saves all messages to file
Messages can also be saved and replayed also using an external keyboard attached to the Remote jack.
microHAM © 2006 All rights reserved
FSK MESSAGES TAB
23
Advertisement
Table of Contents
