Example Of Communications Using The Ip Packet Transfer Function - Mitsubishi Electric MELSEC Q Series Reference Manual

4.3.6
Example of communications using the IP packet transfer
function
The following system configuration is used to explain an example of communications.
Ethernet device
(request source device)
192.168.1.1
(1) Setting in the CPU module 1 and control station (station number 1)
1.
Set the IP address in the CPU module 1.
Project window
118
CPU module 1: 192.168.1.10
Control station : 192.168.2.1
(Station No.1)
Network No.1
: Route through which IP packets are passed (Routing parameters must be set.)
[Parameter]
CPU module 2: 192.168.10.10
Normal station : 192.168.2.2
(Station No.2)
Network No.2
Network No.10
[PLC Parameter] "Built-in Ethernet Port Setting"
Ethernet device
(request destination device)
192.168.10.1