Toro Workman GTX Series Operator's Manual page 47

Problem
The machine-status light flashed 11 times.
The machine-status light flashed 12 times.
The machine-status light flashed 13 times.
The machine-status light flashed 14 times.
The machine-status light is not illuminated.
Possible Cause
1. A motor-encoder fault occurred.
2. Exceeded the maximum motor speed.
1. A controller-configuration fault
occurred.
1. An internal-software fault occurred.
1. A communication fault occurred.
1. There is either no power to the
controller or the controller has failed.
47
Corrective Action
1. Check the motor-encoder (speed
sensor) wiring.
2. Turn the key switch to the O
wait a few seconds, turn the key switch
to the O position, and check for
N
normal operation.
1. Contact your Authorized Toro Service
Dealer.
1. Contact your Authorized Toro Service
Dealer.
1. Contact your Authorized Toro Service
Dealer.
1. Contact your Authorized Toro Service
Dealer.
position,
FF