Toro Workman GTX Series Operator's Manual page 11

Parking-Brake Lever
The parking-brake lever is located on the control
panel (Figure 4).
Whenever you shut off the engine, engage the parking
brake to prevent the machine from accidentally
moving. If the machine is parked on a steep grade,
ensure that you engage the parking brake.
To engage the parking brake, pull the parking-brake
lever toward you (Figure
1. Parking-brake lever
To disengage the parking brake, push down the
button on top of the parking-brake lever, pull the
parking-brake lever toward you to release pressure,
and then push the parking-brake lever forward
6).
1. Parking-brake lever
5).
Figure 5
Figure 6
Direction Selector
The direction selector is located to the left of the
parking-brake lever. The direction selector has 3
positions: F
4).
Note:
The machine can be in any of the 3 positions,
but only moves in the F
positions.
Important:
changing direction.
Horn Button
International Models Only
The horn button is located on the control panel
4). Press the horn button to sound the horn.
Light Switch
Use the light switch
headlights. Push the light switch up to turn on the
headlights. Push the light switch down to turn off the
g033923
lights.
Battery-Discharge Indicator
The battery-discharge indicator is located to
the left of the steering column
battery-discharge indicator indicates the remaining
charge in the batteries. When the batteries are fully
(Figure
charged, 10 indicator bars extend from the 0 to the 1
position. As you use the charge, the indicator bars
disappear, starting at the right side of the meter. For
detailed information on the battery meter, refer to
Understanding and Using the Battery System (page
14).
Hour Meter
The hour meter is located to the right of the light
switch (Figure
total number of operating hours. The hour meter
starts to function whenever you turn the key switch to
the O position or if the machine is running.
N
g033924
Note:
When the machine is running, the hour meter
blinks continuously, recording usage.
USB Power Point
The USB power point is located to the left of the
parking-brake lever
to power mobile devices.
Important:
power point, insert the rubber plug to prevent
damage to the power point.
11
, R , and N
ORWARD EVERSE
and R
ORWARD
Always stop the machine before
(Figure 4) to illuminate the
(Figure
4). Use the hour meter to find out the
(Figure 4). Use the power point
When you are not using the USB
(Figure
EUTRAL
EVERSE
(Figure
4). The