Recommissioning The Machine After Towing - Toro T4240 Operator's Manual

1. Bypass valve
9. Remove the wheel chocks before towing.
Note:
The machine is now in a freewheel
condition and can be towed for a short distance
at a slow speed.
Recommissioning the
Machine after Towing
1. Chock the front wheels.
2. Close the transmission bypass valve
Note:
Turn the valve clockwise and torque 48
N∙m (30 ft-lb) to 52 N∙m (50 ft-lb).
3. Remove the setscrew, washer, and
brake-release bar from the right and left front
wheel motor disc brake assemblies
4. Install the hex plug into the motor end plate of
the motor disc assemblies.
5. Store the brake release bars, washers, and
setscrews for future use.
6. Remove the wheel chocks.
7. Disconnect the tow bar.
Note:
The braking system will now operate
normally.
WARNING
Before using the machine, ensure that the
braking system operates correctly. Carry out
initial checks with the machine at slow speed.
Do not operate the machine if the braking
system does not work correctly or with the
brakes decommissioned.
Figure 32
(Figure
(Figure
g029363
32).
31).
28