Toro T4240 Operator's Manual page 12

Note:
The differential lock is not available for use
when the T mode is selected.
RANSPORT
Transport Latches
Always raise the cutting units to the transport position
and secure with the transport latches and safety locks
when traveling between work areas
Differential Lock
WARNING
Do not engage the differential lock at high
speed. The turning circle will increase with
the differential lock engaged.
Engage the differential lock to increase tractive effort.
Only engage the differential lock at slow speeds
(Figure 4). It will operate while the machine is moving
forward and reverse.
To engage the differential lock, press the differential
lock pedal. To disengage the differential lock, release
the differential lock pedal.
Note:
The differential lock is effective only when
W is selected.
ORK
Forward Travel Speed Backstop
Lever
Use the backstop lever to limit the movement of the
forward pedal for accurate forward travel speed and
to limit the clip rate required
(Figure 5).
Figure 5
(Figure 4).
Move the lever forward to increase the travel speed
setting and rearward to decrease it.
Note:
This is not a cruise-control device. Releasing
the forward travel pedal will allow it to return to neutral.
Cutting Unit Drive Switch
Always put the cutting unit drive switch in the O
position when traveling between work areas.
Adjustable Steering Column
WARNING
Never operate the machine without first
checking that the steering column adjuster
mechanism is in good working order and that,
once adjusted and locked, the steering wheel
remains securely in position.
Only adjust the steering wheel and steering column
when the machine is at a standstill with the parking
brake engaged.
To adjust the angle of the steering wheel, move the
lever down, adjust the angle, and release the lever
(Figure 6).
g014548
To adjust the height of the steering column, move
the lever up, adjust the height, and release the lever
(Figure 6).
1. Adjust the angle of the
steering wheel.
2. Adjust the height of the
steering column.
12
Figure 6
3. Lever
FF
g029196