GE Amersham ImageQuant 800 User Manual page 82

4 Manage images in ImageQuant 800 control software
4.1 View the image after capture
Part
1
2
3
4
Measure the signal intensity
The Intensity function can be used to measure the signal intensity of either a single
point or a defined area of the image. When an area has been created, it can be moved
around the image using the arrows. This function can be used to check if the exposure
time was suitable and do a first estimate of signal levels in different positions on the
image.
To measure the signal intensity, use the following procedure.
Note:
82
Function
Histogram
Increase or decrease lower boundary
Increase or decrease upper boundary
Automatically set the image contrast
Signal intensity measurements are not reliable in saturated images. Saturated
parts of an image are highlighted in purple.
Amersham ImageQuant 800 User Manual 29383813 AA