GE Amersham ImageQuant 800 User Manual page 13

Step
5
6
7
Start the system using an
external monitor
It is also possible to start the system via the external PC if an external monitor is being
used. To do this, use the following procedure.
Step
1
Amersham ImageQuant 800 User Manual 29383813 AA
2.1.2 Start the Amersham ImageQuant 800 control software
Action
Enter your Username and Password.
Note:
To disable Log in, see the
Tap Login.
Wait for the CCD status to turn green, which shows that the CCD has been
cooled to the target temperature.
Result: Image capturing can begin.
Action
Make sure that the instrument is plugged in to a mains power supply.
2.1 Amersham ImageQuant 800 control software
Turn off password protection, on page
2 System Preparation
22.
13