GE Amersham ImageQuant 800 User Manual page 32

2 System Preparation
2.2 Amersham ImageQuant CONNECT
2.2.2 Connect to the instrument
Step
3
4
5
Log in to ImageQuant CONNECT
To log in to Amersham ImageQuant CONNECT and access the Amersham ImageQuant
800 from a remote computer, use the following procedure.
Step
1
2
32
Action
Enter the Nickname of the new instrument in the new line.
Enter the IP Address or the network computer name of the new instrument.
Note:
Network settings depend on the local network. Contact your system network
administrator to find, or set the IP address or network name of the instrument.
Click Save.
Action
Double click on the Amersham ImageQuant CONNECT icon.
Carefully read the license agreement and click I Agree.
Amersham ImageQuant 800 User Manual 29383813 AA