GE Amersham ImageQuant 800 User Manual page 14

2 System Preparation
2.1 Amersham ImageQuant 800 control software
2.1.2 Start the Amersham ImageQuant 800 control software
Step
2
3
4
5
14
Action
Press the power button on the right side of the instrument to activate it.
Result: The instrument's self-diagnostic process will initialize.
Note:
The self-diagnostic process will normally take a few minutes. Connection to
a network may take longer.
Turn on the computer and log into Windows.
Double click on the Amersham ImageQuant 800 control software icon to
connect to the instrument.
If Login is turned On, enter your Username and Password.
Note:
To enable or disable Log in, refer to Turn off password protection, on page
Amersham ImageQuant 800 User Manual 29383813 AA
22.