GE Amersham ImageQuant 800 User Manual page 60

3 Handle methods in ImageQuant 800 control software
3.4 Chemiluminescence image capture
3.4.5 SNOW chemiluminescence exposure
Step
9
10
11
60
Action
To manually enter a target improvement ratio, toggle off Auto stop (1), tap
the box next to Target improvement ratio (2), and enter a new value.
Tap Start.
Result: the instrument will begin CAPTURING.... After each image capture,
the signal to noise improvement ratio will update.
To manually enter a target improvement ratio during image capture, toggle
off Auto stop, tap the box next to Target improvement ratio, and enter a
new value.
Result: the manual boundary will show in the graph.
Amersham ImageQuant 800 User Manual 29383813 AA