H 408x BM
4.6
Removing Broil Heater Element R15
1. Remove the appliance from its cabinet (refer to Section 011-4.3).
2. Remove the screws securing the left side of the lid.
3. Remove the screws securing the left side wall.
4. Remove the left side wall.
5. Push in on the notches of the temperature sensor bracket.
6. Push in on the notches of the temperature sensor retainer and gently
twist it out to remove.
7. Pull the connectors off the heater element (Figure 032-7, Item 1).
8. Unscrew the two heater element locknuts (Figure 032-7, Item 2).
9. Remove the two support plates (Figure 032-7, Item 3).
10. Unscrew the thumbnut in the oven cavity (Figure 032-7, Item 4).
11. Take the heater element out of the oven cavity (Figure 032-7, Item 5).
Figure 032-7: Broil Heater Element Removal
Danger!
After installation is completed, as a matter of standard practice, check the
oven for a tight seal with a microwave leak detector, paying particular attention
to the door and the housing edges.
57
Technical Information