Technical Data; Fault Repair; Iridescent Shine In Oven Cavity (H 4082 Bm); Service - Miele H 408 BM Series Technical Information

Technical Information
1

Technical Data

Wave distributor motor (M21)
Voltage
Output
Speed
Oven cavity light (H3/2)
Voltage
Output
Heat-proof

Table 031-1: Technical Data

3

Fault Repair

3.1

Iridescent Shine in Oven Cavity (H 4082 BM)

Cause:
Not a fault! Oven cavities with PerfectClean shine differently when exposed
to light.
Remedy:
None.
4

Service

4.1

Removing Wave Distributor Motor M21

1. Remove the appliance from its cabinet (refer to Section 011-4.3).
2. Open the door.
3. Remove the thumbnut securing the broil element in the oven cavity.
4. Flip down the broil element in the oven cavity.
5. Remove the three T20 screws securing the ceiling cover (Figure 031-1,
Item 1).
6. Remove the ceiling cover (Figure 031-1, Item 2).
7. Release the locking tab on the guide plate, then pull the plate down and
off its shaft (see Figure 031-1, Item 3).
220 – 240 VAC, 50 / 60 Hz
2.5W
29.8 / 35.8 rpm
12V
10W
up to 572°F (300°C)
48
H 408x BM