Air Duct Removal (After Machine No. 10/59114004); Figure 012-5: Rear Air Duct Removal - Miele H 408 BM Series Technical Information

H 408x BM

Figure 012-5: Rear Air Duct Removal

Danger!
After installation is completed, as a matter of standard practice, check the
oven for a tight seal with a microwave leak detector, paying particular attention
to the door and the housing edges.
4.3 Air Duct Removal
1. Remove the appliance from its cabinet; see Section 011-4.3.
2. Remove the screws securing the appliance lid. Remove the lid.
Danger!
Before performing any service or repair work, discharge the high-voltage
capacitor. See Section A-2.
3. Remove the fascia panel with support plate. See Section 040-4.6.
4. Disconnect the magnetron thermostat connections (Figure 012-6, Item 1).
5. Remove the screws securing the magnetron thermostat (Figure 012-6, Item 2).
6. Remove the magnetron thermostat (Figure 012-6, Item 3).
7. Disconnect the cooling fan connections (3 wires and 1 Molex).
8. See Figure 012-6, Item 4.
9. Remove the screws securing the cooling fan (Figure 012-6, Item 5).
10. Remove the cooling fan (Figure 012-6, Item 6).
(after Machine No. 10/59114004)
31
Technical Information