Structure With Modules On Cc-Link Ie Tsn And Ethernet Devices - Mitsubishi Electric MELSEC iQ-R Series User Manual

Structure with modules on CC-Link IE TSN and Ethernet devices

Connection with modules on CC-Link IE TSN and Ethernet devices
■Line topology
The network with modules and devices is configured in a line topology. A TSN hub is not required.
Connect Ethernet devices to the end of the network.
No.0
No.0: Master station
No.1: Local station
No.2: Remote station
(1) Ethernet device (such as a personal computer)
When an error occurs in a slave station, the stations connected after the faulty station will be disconnected.
■Star topology
The network is configured in a star topology via a switching hub.
Slave stations cannot be connected with a general-purpose hub. Line and star topologies should be mixed in the same
network configuration.
No.0
TSN HUB
No.1
No.0: Master station
No.1: Remote station
(1), (2): Ethernet device
■Coexistence of line and star topologies
Line and star topologies can be mixed in the same network configuration.
• Connect Ethernet devices to the end of the network.
No.0
No.1
No.0: Master station
No.1: Remote station
(1), (2): Ethernet device
No.1
(1)
(2)
General-purpose
hub or TSN hub
5.1 Structure of Authentication Class B Devices and Ethernet Devices
(1)
No.2
No.0
General-
purpose hub
No.1
(1)
(2)
5 SYSTEM CONFIGURATION
5
(1)
(2)
37