Multipoint Convergence - Huawei TE30 Operation Manual

Control a Conference

Multipoint Convergence (1/2)

Tap here.
2
Tap Setting.
Choose Advanced
Settings. Then enter the
administrator password.
5
Tap the value of
Multipoint call mode.
3
Select Multipoint
converge.
6
About Multipoint
Convergence
 Multipoint convergence
is unavailable for the
TX50 after it has the
H.265 4K x 2K license
imported.
 Multipoint convergence
works properly only
Tap Configuration
when the SMC2.0 and
Wizard.
MCU versions are
V500R002C00 or later.
4
 To access the Setting
screen, you must enter
the administrator
password (default:
12345678). Obtain the
password from the
administrator.
Back to Contents