Sitecall; P2P To Multipoint - Huawei TE30 Product Overview

Videoconferencing endpoint

Hide thumbs Also See for TE30:

Table of Contents

TE30 Videoconferencing Endpoint

Product Overview

If there are two or more sites displayed in the list, users can choose one to make a call, as

shown in

Figure 5-2 Voice dialing list

5.2 SiteCall

SiteCall is a unique conference function provided by Huawei. It allows users to define

conferences and participants on the endpoint, making it simple to initiate a multi-party

conference. Users can create conferences using the touch panel, web interface, or remote

control of the endpoint. After setting conference parameters (such as the conference name,

data rate, and number of sites), the users can start the conference. The endpoint can initiate

conferences through H.323 or SIP.

When the endpoint is connected to an MCU, you can turn a P2P call into a multipoint call,

increasing conference efficiency. Below are different scenarios where this may be necessary.

Local Site Receiving Calls from Other Sites

If two sites are having a P2P call and one of the sites receives another incoming call (or

multiple incoming calls), that site can perform one of the following operations:

Issue 03 (2018-06-30)

Figure

5-2.

Answer&Merge: Answer calls from other sites and turn the P2P call into a multipoint

conference.

Answer&Hold: Answer calls from other sites and place the original P2P call on hold.

Then you can place calls on hold or merge calls as follows:

5 Functions and Features

Table of Contents