ABB IRC5 Applications Manual page 82

C Using PROFINET Configurator Express
Continued
11
12
13
Continues on next page
82
Action
Select the added node in the Bus Structure window.
In the Device Details window, set the device properties to reflect the device's properties
on the PROFINET network, see
page 36.
In this example we set:
• DNS/PROFINET Device Name: unit1.cell2
• IP Address: 192.168.5.65
• Reduction ratio: 8 ms
xx1600000033
Note
The DNS/PROFINET Device Name is using a much longer string length and a syntax
that is not allowed in the IRC5 controller for a device name. The DNS/PROFINET
Device Name is matched against the system parameter Name for a device definition
in the IRC5 controller. Therefore the DNS/PROFINET Device Name must be unique
for the first 32 letters or up to the first "." (full stop character).
In this example the device's name in the Robot controller will be "unit1", but on the
PROFINET network it will be displayed with the name "unit1.cell2".
Select the node 0 @IM151-3 PN ST V6.0 in the Bus Structure window.
Now the Module Catalog window displays all possible modules to insert at Slot 1 for
this device. Add the power module. Sort this window as well based on order number.
Add a power module with order number 6ES7 138-4CA01-0AA0 by selecting it and
drop it in the Bus Structure window on the text 0 @IM151-3 PN ST V6.0.
Note
It is very important for some devices that the firmware/hardware version on the device
exactly matches the version used in the configuration (for example V 6.0).
Add the rest of the digital input and output modules by repeating the previous step.
Select the node 1 PM-E DC24V. Sort the Module Catalog window on order number.
Add a 2-bit DO module with order number 6ES7 132-4BB01-0AA0 by dragging and
dropping it on the 1 PM-E DC24V node.
© Copyright 2015-2018 ABB. All rights reserved.
Configuring the PROFINET network settings on
Application manual - PROFINET Controller/Device
3HAC050969-001 Revision: G