Chapter 7 Installation And Uninstallation; Installation Procedure - Mitsubishi Electric MELSEC iQ-R Series User Manual

7
INSTALLATION AND UNINSTALLATION
This chapter explains the procedures for installing and uninstalling MX OPC UA Module Configurator-R.
Considerations for installation and uninstallation
• Log on to a personal computer as a user with an administrator authority.
• Before installation, end all running applications on the operating system.
If software is installed while other applications are running, the product may not run normally.
• Install the software after changing the setting to prevent starting the update program automatically.
The installer may not run normally if an update program for either operating system or software of other companies such as
Windows Update and Java
• After completing the installation, the computer may need to be restarted.
If the restart message appears, restart the computer before using it.
7.1

Installation Procedure

This section shows the installation procedure of MX OPC UA Module Configurator-R.
Operating procedure
1.
Start the installer.
Double-click 'setup.exe' in the DVD-ROM with the MX OPC UA Module Configurator-R product.
2.
Enter or select the necessary information according to instructions shown on the screen.
Windows firewall setting
When the firewall function of an operating system and security software are enabled, perform any of the following operations.
 Set the following programs to the firewall exception.
Program
MELSEC iQ-R series OPC UA Server Module Configuration Tool
*1 This setting is not required when the [Yes] button is selected on the screen below.
For the setting methods, refer to the manuals and online help of the operating system or security software used.
 Disable the firewall function.

update may start automatically.
Storage destination of an execution file (when the installation
destination is C:\Program Files (x86)\MELSOFT.)
*1
C:\Program Files (x86)\MELSOFT\ROPCUA\MxOpcUaModuleConfiguratorR.exe
7 INSTALLATION AND UNINSTALLATION
7.1 Installation Procedure
7
55