Mitsubishi Electric MELSEC iQ-R Series User Manual page 36

Network setting for connection
The following shows the network setting for a configuration personal computer when connecting the computer to an OPC UA
server module via a hub.
Operating procedure
1.
Set the same value for the network portion of the IP addresses for a configuration personal computer and an OPC UA
server module.
Network part
192.168. 3.
255.255.255.
Default value of an OPC UA server module
2.
Set the network setting for the configuration personal computer on the "Internet Protocol Version 4 (TCP/IPv4)
Properties" screen.
(Example) Microsoft Windows 7 Ultimate
 Select [Control Panel]  "Network and Internet"  "Network and Sharing Center"  "Change adapter settings".
 Select "Local Area Connection" and click [Properties] on the right click menu.
 Select "Internet Protocol Version 4 (TCP/IPv4)" on the "Local Area Connection Properties" screen, and click the [Property]
button.
 The "Internet Protocol Version 4 (TCP/IPv4) Properties" screen appears.
3.
Restart the personal computer to enable the network setting.
4 PROCEDURE BEFORE OPERATION
34
4.1 Starting an OPC UA Server Module and an Configuration Personal Computer
Set the same value.
Host part
3
0
Configuration personal computer
Network part Host part
192.168. 3. 100
0
255.255.255.
Set different values.