8.2
Setting of an OPC UA Server Module
This section shows the setting of an OPC UA server module in the configuration tool.
Setting procedure
Starting the configuration tool
1.
Start the configuration tool.
Select [Start] [All Programs] [MELSOFT] [MX OPC UA] [MELSEC iQ-R series OPC UA Server Module
Configuration Tool] from Windows Start.
Setting a network
Setting an OPC UA server
1.
Select [Tool] [Network Setting].
This setting is used as a default.
1.
Select [Tool] [OPC UA Setting].
• This setting is used as a default.
• When connecting from an OPC UA client,
use this setting.
8.2 Setting of an OPC UA Server Module
8 OPERATION EXAMPLE
8
59