Parameter Setting - Mitsubishi Electric MELSEC iQ-R Series User Manual

4.3

Parameter Setting

This section shows the mode setting of an OPC UA server module in the parameter setting of an engineering tool.
For details on the parameter setting, refer to the following:
MELSEC iQ-R OPC UA Server Module User's Manual (Application)
Startup method
Operating procedure
1.
Select [MELSOFT]  [GX Works3]
*1 Select [All apps] in the Start screen or [Start]  [All Programs]/[All apps].
*2 Does not appear in Windows 8 or later.
Parameter setting
Operating procedure
1.
Create a new project.
[Project]  [New]
2.
Select a series, a type, and a program language, click the [OK] button.
3.
Set whether to use module labels, click the [OK] button.
4.
Display the "Add New Module" screen.
[Navigation window]  [Parameter]  right-click [Module Information]  [Add New Module]
*2
 [GX Works3] from Windows Start
*1
.
4 PROCEDURE BEFORE OPERATION
4.3 Parameter Setting
4
39