Chapter 2 Specifications; Performance Specifications; Hardware Specification - Mitsubishi Electric MELSEC iQ-R Series User Manual

2
SPECIFICATIONS
This chapter explains the specifications of an OPC UA server module.
2.1

Performance Specifications

This section shows the performance specifications of an OPC UA server module.

Hardware specification

Item
SD memory card slot Interface
Power supply
Ethernet port Number of channels
Interface
Data transmission speed
Number of cascade
connections
Communication mode
Transmission method
Maximum segment
length
Applicable connector for
external wiring
Supported function
Number of occupied I/O points
Clock
5 VDC internal current consumption
External dimensions Height
Width
Depth
Weight
*1 1000BASE-T/100BASE-TX/10BASE-T, and full-duplex/half-duplex communication mode are identified by an OPC UA server module
depending on the hub.
For connection with a hub not having the auto-negotiation function, set the setting on the hub side according to the communication
mode.
*2 It is for a repeater hub.
For a switching hub, consult the manufacturer of the hub used.
*3 For the maximum segment length (length between hubs), consult the manufacturer of the switching hub used.
Specification
SD memory card/SDHC memory card (2 GB to 16 GB)
+3.3 VDC, up to 200 mA
2
*1
1000BASE-T
1000 Mbps

*2
Full-duplex/half-duplex
Base band
100 m (length between a hub and a node)
*3
RJ45
• Auto-negotiation (automatic recognition of 1000BASE-T/100BASE-TX/10BASE-T)
• Auto-MDI/MDI-X (automatic recognition of a straight/crossing cable)
32 points/slot (I/O assignment: Intelli. 32 points)
Acquired from a CPU module (CPU No.1 in a multiple CPU system).
1.25 A
106mm
27.8 mm
110mm
0.25 kg
100BASE-TX 10BASE-T
100 Mbps 10 Mbps
2 levels maximum 4 levels maximum
2 SPECIFICATIONS
2.1 Performance Specifications
2
17