GE DMS Go Operator's Manual page 74

Chapter 2. Instrument Setup
2.3.3e Entering a New Activation Code for Options (CONFIG - CODE)
If you purchase a specific software option, GE will provide a specific activation code. These specific options include TOPCOAT and
AUTO-V, Extended Data Recorder, and USM Go Mode. Activation codes matched to your DMS Go serial number can be input via the
CODE submenu, which is located in the CONFIG menu. This submenu also lists the serial number assigned to your instrument. To input an
activation code:
In the MAIN menu, scroll to the CONFIG submenu using the joystick (
1.
2. Use the joystick (
character of the current code value is highlighted (Figure 18 below).
52
Your Complete Source for
Testing Equipment. Since 1969!
) to select the function titled CODE, and then use the joystick (
Figure 18: The Code Entry Function
www.BergEng.com
Berg Engineering & Sales Company, Inc.
).
) to activate the function. Note that the first
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com