2.3.2h
Selecting a Rectification Mode (CONFIG-RECTIFY) (cont.)
In the MAIN menu, activate the CONFIG submenu using the joystick (
1.
2.
Use the joystick (
NEG - Shows the negative component of the RF signal but displays it in a positive orientation.
•
POS - Shows the positive component of the RF signal.
•
FULL - Shows the positive and negative halves of the RF wave, but both are oriented in the positive direction.
•
RF - Shows the echo with no rectification.
•
3.
Move the joystick (
) to select the desired rectification method.
4.
After completing your selection, use the joystick (
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
) to select the function titled RECTIFY. The following options are available:
www.BergEng.com
Berg Engineering & Sales Company, Inc.
).
) to move to another function, or press HOME to return to the Main Menu.
Chapter 2. Instrument Setup
43
1-847-577-3980
Info@BergEng.com