GE DMS Go Operator's Manual page 112

Chapter 4. Measuring and Recording Data
4.1.1a Setting the Gate Starting Point (GATE - GATE A or GATE B START)
In the MAIN menu, scroll to the GATE submenu using the joystick (
1.
2. Use the joystick (
3. To change the gate starting point, either move the joystick (
Increasing and decreasing the value of the starting point moves the gate to the right and left, respectively. The gate starting point remains as
set here, even when width adjustments are made.
Note: The GATE A START and GATE B START functions have both coarse and fine adjustment modes. Coarse adjustments (of .050,.060 or
,100 increments) are made with the function toggle, while fine adjustments (of 0.001 in) are made with the joystick. When the
function name appears in all capital letters, coarse adjustments are being made, while fine adjustments occur when the function
name appears in all lower-case letters.
4. After completing your selection, move the joystick up or down (
to the Main Menu.
84
Your Complete Source for
Testing Equipment. Since 1969!
) to select the GATE A START (or GATE B START) function.
www.BergEng.com
Berg Engineering & Sales Company, Inc.
).
) or press F3 and F4.
) to navigate away from this function, or press HOME to return
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com