Chapter 2. Instrument Setup
2.3.2d
Setting the Display Resolution (CONFIG-RESOLUTION)
In the MAIN menu, scroll to the CONFIG submenu using the joystick (
1.
2.
Use the joystick (
thickness you are measuring, to 1/10 (X.X) or 1/100 (X.XX) in mm and 1/100 (X.XX) or 1/1000 (X.XXX) in inches.
Note: In the AUTO selection, the threshold is 10 inch (for inches). The value which is smaller than 10 inch will be shown in X.XXX mode.
Otherwise the value will be shown in X.XX mode.
For mm, the threshold is 100 mm. The value which is smaller than 100 mm will be shown in X.XX mode. Otherwise the value will be
shown in X.X mode.
3.
To change the resolution level, move the joystick (
4.
After making your choice, use the joystick (
36
Your Complete Source for
Testing Equipment. Since 1969!
) to select the function titled RESOLUTION. Display resolution can be set automatically (AUTO) to the
).
) to move to another function, or press HOME to return to the Main Menu.
www.BergEng.com
Berg Engineering & Sales Company, Inc.
).
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com