Installation; Installing A Battery Temperature Sensor - Huawei ESS-240V12-9AhBPVBA Series Quick Installation Manual

4

Installation

(Optional) Installing a Battery Temperature Sensor
1. Remove the three screws that secure the
cover of the battery pack.
2. Remove the cover horizontally.
3. Remove the cable hole baffle plate of the battery temperature sensor, rotate the baffle plate 180
degrees, and secure it with the removed screws. Route the battery temperature sensor into the
battery pack through the cable hole, and secure the sensor cable to the cable bridge by using a
cable tie.
Cable hole baffle plate
Battery
temperature
sensor
4. Reinstall the cover for the battery pack, and secure the cover by using the three removed screws.
NOTE
If multiple battery packs are installed, install
the battery temperature sensor for only one
battery pack.
Cover
Cable bridge
4