Chapter 5 System Configuration - Mitsubishi Electric MELSEC iQ-R Series User Manual

5
SYSTEM CONFIGURATION
This chapter describes the system configuration of the I/O module.
5.1
System Configuration
System configuration example when I/O modules are used
The following figure shows an example of the system configuration when I/O modules are used.
(2)
(1): Spring clamp terminal block
(2): Dedicated cable with connector (relay terminal module) (optional)
(3): Dedicated cable with connector (connector/terminal block converter module) (optional)
(4) Connector
(5): Relay terminal module (optional)
(6): Connector/terminal block converter module (optional)
(3)
(5)
(1)
(4)
(6)
5 SYSTEM CONFIGURATION
5.1 System Configuration
5
91