Table of Contents
Advertisement
3.5
Installing an Adapter
•
Install an adapter if only the CIM communications cable connects to the UPS.
•
Prepare ST3.5x35 tapping screws, washers, and 6x30 plastic expansion sleeves by yourself.
ST3.5x35 tapping screw
6x30 plastic expansion sleeve
4
Installing Cables (ECC Scenario)
4.1
System Networking
This chapter uses the ECC scenario where the CIM communications cable connects to a smart ETH
gateway as an example to describe how to connect cables. In ECC scenarios, connect cables by
following instructions in this section.
Washer
ST3.5
0.3 N· m
DC input
Smart ETH gateway
In the ECC scenario, the CIM
communications cable can
also connect to the PoE
switch.
6
Advertisement
Table of Contents
