Panasonic IMAGECHECKER PV230 Manual page 76

2.
Select "Manual" for "Code Model
Parameter", and "Default Val." for "Based
Data on".
3.
Capture the code on the Screen window, and
press the ENTER key on the "Execute"
button for "Training".
4.
Once the training is complete successfully,
the message shown in the right figure
appears.
Now the setting for the value to read the code
captured in step 3 is complete.
5.
Set "Current Val." for "Based Data on".
This setting adds the reading condition to the
value currently specified.
6.
Capture another code on the Screen window.
7.
Press the ENTER key on the "Enter" button
for "Training".
8.
Repeat the above steps 6 and 7.
Every time "Training" is executed, the
conditions are added.
In the case of this setting, the "Set value" changes to a reliable value for reading the image No. 0 by
the first "Training". By the second "Training", the value changes to a value that the image No.1 is
also read. By the third "Training", it changes to a value that the image No.2 is also read. By
repeating this operation for the images No.3 to 5, all the images used for Training can be certainly
read.
74