Executing Test - Panasonic IMAGECHECKER PV230 Manual

2.7 Executing Test

Press the TRIG key to execute a test. Check whether or not the desired characters could be recognized with
the setting specified so far.
1.
Press the TRIG key to execute a test.
The recognized characters, judged characters and the information list for the recognized characters are
displayed.
About the recognized character information list
Selecting the information list and moving the cursor onto each recognized character displays the
character box on the screen window in pink when the judgement is OK, and in blue when the
judgement is NG. Confirm the recognized results watching the actual character images.
Recognized character:
Recognition rate
Area / Width / Height:
(2nd.) Recognized character:
As for the 2nd recognized character, data other than labels (Recognition rate, Area, Width, Height) cannot be
displayed.
54
The label of the character pattern that has been judged as the most similar
character to the segmented character as a result of comparison with all the
character patterns registered in Dictionary. It is also called "1st Recognized
Character".
The recognition rate of recognized characters.
The area, width and height of recognized character.
These values are the same as the values indicated in the list on SETUP
menu of Segmentation Condition.
The label of the most similar character pattern next to "(1st) Recognized
Character".