Panasonic IMAGECHECKER PV230 Manual page 47

Setting Procedure
1.
Select "Calendar" in "Judgement Type".
"Calendar Condition: Set" becomes selectable.
2.
Select "Calendar Condition: Set".
SETUP menu for calendar condition is displayed on the screen.
The judgement date is displayed at the bottom of SETUP MENU. This date is displayed in the format
selected from "General" > "Calendar" > "Date Format". (It is not linked to the formats such as calendar
format and delimiter to be selected in the subsequent procedures.) In addition, when "Range" has been set
in "Offset", the farthest judgement data is displayed.
3.
Select "Calendar Format".
Default: "Year/Month/Day"
4.
Specify a delimiter from "," / " / " / "-" / "None" in
"Delimiter".
Default: "."
5.
Select either "2-digit" or "Variable" in "Digits of
Month and Day".
Default: "2-digit"
6.
Only when the format including "Year" has been
selected in "Calendar Format", select "Digits of
Year".
Default: "4-digit"
7.
Select "Designated Date" or "Range" in "Offset".
Default: "Designated Date"
However, when selecting "Delimiter: None" and "Digits
of Month and Day: Variable", "Offset" is fixed at
"Designated Date" and "Range" is not selectable.
8.
Set "Year", "Month", "Day", "Hour" as necessary.
The default is "0". The judgement date at this time is the
date of the calendar.
Settable range
Year
Month
Day
Hour
When "Delimiter" is "None" and "Digits of Month and Day" is "Variable", and if recognized characters are
like "123" which express two values, 1/23 and 12/3, judgement is performed on the both values.
The format of "Judgement Date" is displayed in accordance with the setting of "Date Format" in "TOOL" >
"General" > "Calendar".
Note that this format is not that specified in the "Calendar" setting (set in the above steps 3 to 8).
That is why the displayed "Judgement Date" is "2009/07/17" which is with "/" although "Delimiter" has been
set to "." in the above example.
-99 to 99
-11 to 11
-30000 to 30000
-23 to 23
45