Panasonic IMAGECHECKER PV230 Manual page 50

Setting Character size per Dictionary label
Specify the maximum and minimum values of area, width and height per dictionary label.
1.
Select "Per Dictionary Label" in
"Judgement Character Size".
"Character Size: Set" becomes
selectable.
2.
Select "Character Size: Set".
SETUP menu for Character size is
displayed on the screen.
<TRIG>: Executing a test displays each maximum and minimum values (*) of area, width and height in the
row of the label for the recognized character in the rightmost area of the list.
*) When more than one characters with the same label have been recognized within a character string, the
maximum and minimum values are displayed because their sizes are unequal.
3.
Input "Area Offset", "Width Offset" and "Height Offset"
checking the maximum and minimum values for each
item of dictionary label.
Set necessary items only. The items entered with "0" for the
maximum and minimum values both by executing "Set All"
without inputting offset values represent not to execute
Judgement character size.
4.
Execute "Set All: Set".
For each item, the value "Maximum + Offset" is input as the
maximum value, and the value "Minimum - Offset" is input as
the minimum value.
5.
For adjusting the values collectively specified, select the
list, and select the items (each max. and min. values) of
the dictionary label which needs adjustment to change
the values.
48