Panasonic IMAGECHECKER PV230 Manual page 31

Check the characters registered (in Dictionary).
Check or delete the character images registered with labels.
1.
Select "Edit: Start".
The setting window of character image in Dictionary is displayed.
2.
Check the character patterns registered for each label.
The character patterns for 6 labels are displayed in 1 page. Switch pages by the following steps.
- Move the ENTER key from right to left or up and down.
- Press the F2 key or the F3 key.
- Select "Switch Page" on the right side of the window after selecting a character pattern.
About Character Size
The image size of the selected character pattern is displayed on the right side of the window. This size is
the one that 4 pixels each have been added to the width and height displayed in the list of the recognition
result or the list of the cut out result.
* About Character Size
The size displayed here may not be the same as the size of an image segmented
using the "Registration" menu, because it is normalized for registration. Even if the size
displayed in this menu becomes small, it does not decrease the accuracy of the
dictionary or inspections as the detailed information has been registered in the
dictionary.
29