NEC UNIVERGE SV8300 Pc Programming Manual page 29

STEP4: Enter the system password.
Perform this procedure only if a system password is registered on the SV8300.
[Connect] button
No. Item
(1) Connection Select a preset default account, or an account that has been set in "Connection
Account Account".
• IP (LAN, Default)
• IP (VoIP, Default)
• RS-232C (9600 bps) : Select Direct connection when RS-232C connection
(2) System Type the system password that is preregistered with the SV8300.
Password
(1)
(2)
: An IP connection to the SV8300 which system data all
clear/standard system data has been loaded.
Select IP (LAN, Default) when IP connection (ETHER-
NET port) is used.
: An IP connection to the SV8300 which system data all
clear/standard system data has been loaded.
Select IP (VoIP, Default) when IP connection (VOIP port)
is used.
(direct connection) is used.
2-13
Chapter 2 Setting Up PCPro
Communication Link with the SV8300
Description
NWA-033628-001 Rev.1.0