NEC UNIVERGE SV8300 Pc Programming Manual page 222

Program Upgrade (Off-line)
Error Message
Couldn't turn the FTP Server
folder to default.
Check the following items.
• If another FTP Server being
active on a PC, stop for it.
• Confirm selecting the Menu
item [Tools] > [Configuration]
> [FTP Server].
Program files are wrong. Click
the 'Next >>' button after con-
firming some files to upgrade.
Couldn't confirm the IP Address
because that LAN cable is
unplugged or Network Connec-
tion is in an invalid state.
Failed to change the IP Address.
Change IP Address to
192.168.1.250 manually.
LAN cable is unplugged or Net-
work Connection is in an invalid
state.
PC's IP Address hasn't been set
for 192.168.1.250. Confirm the
setting.
Cause
–
The program file to be
upgraded is wrong.
The LAN cable was out of
position or the network con-
nection was invalid when the
plug-in launched.
–
The LAN cable was out of
position or the network con-
nection was invalid when the
[Next >>] button was clicked
in the [Program Upgrade]
screen.
The PC did not have a speci-
fied IP address when the
[Next >>] button was clicked
in the [Program Upgrade]
screen.
C-10
Appendix C Troubleshooting
Remedial action
Shut down the FTP server once
and then retry.
1. Check that all required files
are available in the specified
folder.
2. Check that the specified
folder contains nothing but
unnecessary files.
Connect the PC LAN cable and
check the status of network con-
nectivity.
Change the IP address manually.
Connect the PC LAN cable and
check the status of network con-
nectivity.
Set 192.168.1.250 as an IP
address.
Continued on next page
NWA-033628-001 Rev.1.0