NEC UNIVERGE SV8300 Pc Programming Manual page 119

No. Item
(1) "System Configura-
tion" check box
(2) "Detailed of Blade"
check box
(3) "Port" check box
(4) Virtual port
STEP4: Click the [OK] button.
You are directed back to the [System Configuration Display] screen. The item that has been
selected in Step 3 is displayed in the Read Item field.
STEP5: Click the [Read] button.
The browser lanches to display the System Configuration Info Report.
System configuration information has now been displayed.
Check to read out the following system configuration information
(default: checked):
• Outline information of system
• License information
• IP Address of unit
• Status of Blade
Check to read out firmware information about the blades mounted in the
SV8300 and the status of system data (blade type) registration (default:
checked).
* When this check box is checked, "System Configuration" check box is
automatically checked.
Check to read out the station numbers/trunk numbers registered in the
physical port and the status of utilization (default: checked).
* When this check box is checked, "System Configuration" check box
and "Detailed of Blade" check box are automatically checked.
Check to read out the station numbers/trunk numbers registered in the
virtual port and the status of utilization (default: checked).
4-73
Chapter 4 Standard Mode
Description
[Maintenance] Category
NWA-033628-001 Rev.1.0