NEC UNIVERGE SV8300 Pc Programming Manual page 160

SETTING DATA
DATA
A231 Station Authorization Code/Password Change
A232 Pad Lock Set by Station Authorization Code
A233 Pad Lock Reset by Station Authorization Code
A234 Call Pickup-Group (Pilot)
A239 IP Station Logout
A241 Call Forwarding-Logout/Call Forwarding-PS/Wireless
Telephone Out of Cell (Zone) Set
A242 Call Forwarding-Logout/Call Forwarding-PS/Wireless
Telephone Out of Cell (Zone) Cancel
A243 System Speed Dialing origination (1-8 digits abbreviated
Code: depends on CM42>77)
A256 Mobility Access Mode Set
A257 Mobility Access Mode Cancel
A258 PS Location Search
100 Trunk Route 00
163 Trunk Route 63
200 Route Advance Block 00
231 Route Advance Block 31
300 Tenant Block 00
323 Tenant Block 23
500 Kind of Special Terminal Block 00
515 Kind of Special Terminal Block 15
MEANING
5-16
Chapter 5 System Data Mode
Using System Data Mode
REMARKS
For PS Location Display (Multiline Terminal
LCD)
Data is to be assigned for Trunk Routes corre-
sponding to the access codes for outgoing trunk
calls (COT, LDT, ODT, etc.).
Data is to be assigned in the following two
cases; there are two or more trunk routes for
outgoing call, and for determining the seizing
order of the trunk route.
Data is to be assigned when the purpose and
method of the same access code varies with
each tenant.
Data is to be assigned when the purpose and
method of the same access code varies with
each special terminal (single line station).
NWA-033628-001 Rev.1.0