Setting In The Control Station - Mitsubishi Electric MELSEC iQ-R RJ71LP21-25 User Manual

Setting in the control station

Connect the engineering tool to the CPU module on the control station and set the parameters.
1.
Set the CPU module as follows.
[Project]  [New]
2.
Click the [Setting Change] button and set "Use" for "Module Label".
3.
Set the RJ71LP21-25 as follows.
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]
7 COMMUNICATION EXAMPLES
7.1 Cyclic Transmission Program
7
31