Appendix 2: Indoor Unit Base Dimensions - Huawei NetCol8000-A Series Quick Manual

Appendix 2: Indoor Unit Base Dimensions

B.1 NetCol500-A060 Base (Unit: mm)
1. You are recommended to use angle steel, square steel or channel steel with the width being
45–60 mm and thickness being 4–5 mm.
•
When the width of angle steel is less than 60 mm or equal, do not consider avoiding.
•
When the width of angle steel is more than 60 mm, it is interfering with the holes which
routing cables, cut out holes to avoid interfering.
3. Between the bracket and the unit is attached shock pad which is made of Ethylene-Propylene-
Diene Monomer (EPDM), and the thickness is 5 mm.
4. Pay attention to controlling the welding process and avoiding excessive error.
5. Adjust the height of the base according to the actual situation.
Horizontal Installation
Vertical Installation
NetCol500-A080 Base (Unit: mm)
B.2
Horizontal Installation
39