Table of Contents
Advertisement
11.2.4 Recording statistics
11.2.5 Displaying online recording diagnosis
Bosch Motorsport
– For testbench (without lap trigger) select 'Testbench'.
– For racetrack (with lap trigger) select 'Racetrack'.
b) Choose wether the logging partition shall be named Engine recording or Chassis re-
cording.
c) Advanced setting: Select your logging configuration file, if provided by your Bosch Sup-
port Engineer.
d) Choose or create the condition to start recording
e) Enter a password hint and a password (optional).
f) Setting for automatic fragmentation. Do not change!
The tab 'Statistics' shows the channels' allocation and their current data rate related to the
transmission frequency of the C 60 and the whole transmission system.
The overview helps to detect bandwidth bottlenecks of channels. Bandwidth bottlenecks
can be solved by changing the 'fast/slow block' setting for each channel.
The data rate of the whole system is often less than the data rate of the C 60 and limits
the overall transmission speed.
("statectrl_ok")
1.
To add a Recording Diagnosis element to a measurement sheet, drag a 'Bit-LED' ele-
ment from the Toolbox and drop it on measurement sheet.
2.
Drag channel 'statectrl_ok' from the Data Area and drop it on the 'Bit-LED' element.
The 'Bit-LED' element shows the state of received channel data in bit-representation. A
green highlighted channel means 0, a red highlighted channel means 1.
– Measurement correctly initialized, but recording threshold(s) not reached: 254
– Measurement correctly initialized, C 60 is recording data: 255
– Values less than 254 indicate an error state
Data_Logger_C_60_Manual
Recording and Telemetry | 11
69 / 100
Advertisement
Table of Contents
