Table of Contents
Advertisement
9 | Analog and Frequency Inputs
9.5.1 Special functionality: vehicle speed
9.5.2 Setting up calculated speed
54 / 100
6.
Click 'OK' when done. The channel is inserted into the C 60 Project Tree.
a)
b)
a) Channels available in computed sources.
b) Available measurements for channel.
c) Calculation of hysteresis channel.
This functionality allows:
– high performance vehicle owners to measure wheel spin under acceleration and
wheel slip/lock under braking.
– calculating vehicle 'speed over ground'.
Vehicle speed calculation function
– Calculating vehicle speed of 2 wheel drive: (Wheel speeds of non-driven axle as input)
Calculated speed is average of both speeds if speed difference between wheels <
limit.
Calculated speed is maximum of both speeds if speed difference between wheels >
limit.
– Calculating vehicle speed of 4 wheel drive: (Wheel speeds of all wheels as input)
Calculated speed is speed of 2nd fastest wheel.
1.
Click on tab 'System Overview'.
2.
Click on 'Measurement Sources' in the Toolbox.
Data_Logger_C_60_Manual
c)
Bosch Motorsport
Advertisement
Table of Contents
