Table of Contents
Advertisement
10 | Online Measurement and Calibration
10.1.2 Using the measurement sheets
62 / 100
2.
To create the sheets, right-click on C 60 and select 'Create measurement views...' from
the C 60 context menu.
The automatically created sheet is inserted in the Project Tree under 'Measurement
Container' and 'Device Channels'. If the C 60 is connected to RaceCon and the status
is green, live values of the channels are shown.
1.
When RaceCon is online, press the 'F11' key to switch from 'Design Mode' into 'Race
Mode'. The measurement sheet is extended to full screen. The button for offset calib-
ration is active.
2.
Switch between different sheets using the tabs at the bottom of the window.
3.
Press the 'Esc' key to return to 'Design Mode'.
Data_Logger_C_60_Manual
Click to create
measurement sheets
Bosch Motorsport
Advertisement
Table of Contents
