Table of Contents
Advertisement
Bosch Motorsport
NOTICE
Working with automatically created measurement sheets is ex-
plained in chapter 'Setting up an online measurement'.
NOTICE
Choosing a filtered channel as an input for 'PWM_OUT' will cause
delayed reaction due to the delay introduced by the digital filter.
Use unfiltered values for this purpose.
NOTICE
The 'power-on' state of the PWM output is 'switch open' (0% duty
cycle).
4.
Click 'Finish' when done.
5.
Enter channel name and description.
6.
Click 'OK' when done. The channel is inserted into the C 60 Project Tree.
Channel is
linked to
PWM_OUT02
Measurement
channels
Measurement label
pwm_err_ls_out_01_OL
pwm_err_ls_out_01_OT
pwm_err_ls_out_01_SCB
pwm_err_ls_out_01_SCG
Table 1: Diagnostic channels
NOTICE
The diagnosis of PWM output 2-4 is similar.
Data_Logger_C_60_Manual
Characteristic
curve
Function
PWM output 1 error open load
PWM output 1 error over temperature
PWM output 1 error short circuit to battery
PWM output 1 error short circuit to GND
Analog and Frequency Inputs | 9
Output
frequency
57 / 100
Advertisement
Table of Contents
