Table of Contents
Advertisement
9 | Analog and Frequency Inputs
9.3.5 Digital filter details
48 / 100
NOTICE
Working with automatically created measurement sheet is explained
in chapter 'Setting up an online measurement'.
7.
Click 'Finish' when done.
8.
Enter channel name and description.
9.
Click 'OK' when done. The channel is inserted into the C 60 Project Tree.
Channel is
linked to
ANA06
Available measurements for channel:
Measurement label
raw_name
raw_name_fi
name
name_fi
Online definition of the curve is covered in the chapter 'Online calibration of measurement
channels' of this manual.
C 60 uses A/D converter oversampling and digital filtering to recording rate.
Digital filters eliminate 'out-of-band' noise
Data_Logger_C_60_Manual
Input pin
Characteristic
Pull-up
curve for
resistor is
sensor
deactivated
Function
mV value of sensor
filtered mV value of sensor
physical value of sensor
filtered physical value
Adjustment
is enabled
Bosch Motorsport
Advertisement
Table of Contents
