Table of Contents
Advertisement
9.3.2 Configuring a generic linear sensor
Bosch Motorsport
5.
Enter channel name and description.
6.
Click 'Ok' when done. The channel is inserted into the C 60 Project Tree.
Channel
is linked
to
ANA03
Available measurements for channel:
Measurement label
raw_name
raw_name_fi
name
name_fi
Example: Acceleration sensor 5 g
From sensor data sheet – operating characteristics:
Sensitivity 400 mV/g, Offset 2500 mV
The sensor has a linear output signal with sensitivity and offset
1.
Click on 'Measurement Sources' in the Toolbox.
Data_Logger_C_60_Manual
Analog and Frequency Inputs | 9
Input pin
Calculation of
Pull-up
physical value with
resistor is
characteristic curve
activated
Function
mV value of sensor
filtered mV value of sensor
physical value of sensor
filtered physical value
41 / 100
Advertisement
Table of Contents
