Table of Contents
Advertisement
Bosch Motorsport
4.
To activate the internal pullup-resistor, check the box. The internal pullup-resistor is
used to get a 5 V signal at the analog channel of the C 60. It allows you to use a push-
button. The fixed value of the internal pullup-resistor is 3,010 ohm. If using an addi-
tional external pullup-resistor, set up the overall resistance.
5.
Click 'Next' when done. The second part of the 'Multipoint Adjustment Wizard' opens.
6.
Click 'Next' when done. The third part of the 'Multipoint Adjustment Wizard' opens.
Physical
limits of
channel
Data_Logger_C_60_Manual
Analog and Frequency Inputs | 9
Enter physical
limits of the sensor
Choose data type of
the measurement
variable
Enable additonal
online calibration
Enter name to
automatically create a new
measurement sheet
47 / 100
Advertisement
Table of Contents
