Canon XU-81 Operation Manual page 24

6. When operating this device, please use a control device such as an operation unit. When panning or
tilting by hand or other methods, it can cause damage to this device.
CAUTION
1. Make sure that all the mountings are tightened securely. A loose mounting may cause the unit to fall
down, possibly resulting in injury.
2. Periodically (every 6 months to a year as a general rule) inspect the mountings for looseness. A loose
mounting may cause the unit to fall down, possibly resulting in injury.
NOTE
1. This product incorporates a protective mechanism in the pan and tilt control sections. Accordingly,
moving parts may swivel if subjected to strong external force or wind speeds of 35 m/sec or higher. In
this case, wait until the external force subsides before panning or tilting the camera.
MAINTENANCE AND INSPECTION
WARNING
1. Clean only with dry cloth.
2. Before cleaning the outside paneling of the unit, be absolutely sure to disconnect the power plug from
the power outlet. Furthermore, do not use benzene, paint thinners or other easily ignitable substances
for cleaning purposes. Doing so is a fire and electric shock hazard.
3. This system should not be opened or disassembled, except by qualified service personnel.
• Dangerous parts are to be found inside the unit, contact with them may cause finger pinch and electric
shock hazard.
• If foreign objects and dust enter the inside, it may cause damage to this device.
• In case of high temperature and high humidity, internal damage and condensation may occur if humid
air is allowed to enter this device.
WARNING
1. When transporting the unit, place it inside the original shipping carton which was used specifically to
house the unit.
STORAGE
E4